缝编毡Stitch Mat

缝编毡Stitch Mat

定义：玻璃纤维缝编毡（以下简称缝编毡），是由按一定方向排列的无捻粗纱或方格布作为基层材料，经短切成一定的长度后，无定向均匀平铺,用**纤维缝编而成。
Fiberglass stitched mat is made from chopped fiberglass strands or woven roving which is cut into a certain length and randomly dispersed ,laid on a roving matrix then stitched together with organic fibers.

产品特点：
1. 均匀性好，湿拉强度高
2. 兼**织布方向性及毡的多向性特点
3. 表面孔隙多，浸透好
4. 纤维结构具有可设计性
5. 不易产生位移变形，能保持较佳的力学性能

Even thickness, high wet tensile strength retention
Directional properties and strengths same to woven roving
Enough hollows on surface to make it good permeability
Flexibility to design variety weaving structures
Stable structure required to achieve maximum tensile strength properties

用途：
缝编毡应用于增强不饱和聚酯树脂并适用于拉挤成型、注射成型（RTM）、缠绕成型、手糊成型等玻璃钢成型工艺。如拉挤型材管道、贮罐、风力发电机叶片等制品。
Fiberglass stitched mat is used in unsaturated polyester resin strenthen, primarily in pultrusion, RTM, filament winding and hand lay-up processed. Such as pultruded parts, pipes, storage tanks, wind generator blades and other FRP products.

储存: 产品应堆放于干燥凉爽处，如若不用，请勿打开包装物或扎紧包装口，以免受潮。
stitch mat should be reserved indoor with drying, cool condition. It suggests that better to keep the package closed in order to prevent it from the wet.

包装: 缝编毡卷绕在内经为76mm的纸芯上，装入纸箱内.外套聚乙烯包装袋，袋口用聚酯绳采用活口扎紧，，然后码放在托盘上，每个托盘竖放12箱，横放9或6。托盘堆高不大于两层，纸箱堆高不大于三层。
Products package and storage, transportation
Stitch mat will be wrapped up paper pipe of 77mm inner diameter, and polyvinyl chloride film will be used for packing and sealing and then package them with carton.the mats should be put horizontally 12 and vertically 6 cartons every pallet.height of the pallet’s heap should be within the two layers of the pallet’s height.height of the carton heap should be within three layers of the carton. 

技术指标Technical index

性能
property	单位面积质量
Area weight	玻璃类型
glass	短切纤维/单重csm g/m2	粗纱或方格布/单重 twistless roving or woven roving g/m2	幅宽 width	层数
layer	含水率 moisture content	可燃物含量combustible content
%	卷重roll/kg
测试方法 TEST METHOD	ISO3374	GB/T 1549	-	-	ISO5025	-	ISO3344	ISO1887	-
CMK300	-5±10	C	300	-	±3	单	≤0.3%	6.9±1.4	-
CMK380	-5±10	C	380	-	±3	单	≤0.3%	5.4±1.1	-
CMK450	-5±10	C	450	-	±3	单	≤0.3%	4.5±0.9	-
CMK580	-5±10	C	870	870	±3	双	≤0.3%		50
EMK300	-5±10	E	300	-	±3	单	≤0.2%	6.9±1.4	-
EMK380	-5±10	E	380	-	±3	单	≤0.2%	5.4±1.1	-
EMK450	-5±10	E	450	-	±3	单	≤0.2%	4.5±0.9	-
EMK580	-5±10	E	870	580	±3	双	≤0.2%		50